Product Description

Suspension Set for OPGW used primarily for straight-sided drop tower, or less than 15 º line tower connection. Clamp screw from the inside and outside the two pre-twisted wire, hanging head and supporting the composition of connecting fittings. Clamp grip strength is greater than the tensile strength of fiber optic cable rated 10% -20%, for the transfer axial loads, and distributed radial compressive stress, better protection of fiber optic cable, to avoid the phenomenon of bending stresses and stress concentration.
Suspension Set for OPGW with the Suspension has excellent fatigue resistance, the power cable can also play a supporting role in damping.

Applications

OPGW prefabricated overhanging wire clamps are mainly used to support overhanging OPGW fiber optic cables. It is suitable for OPGW cables, conductors and ground wires on transmission lines. It is recommended for use on lines with a turning angle of fewer than 30 degrees.

Features

1. Reasonable static stress distribution and good ability to withstand dynamic stresses (such as vibration and fluctuation). The grip force on the cable can reach 10%~20% of the ultimate tensile strength of the cable.

2. No rigid contact with the cable (conductor) and minimal wear.

3. Excellent material makes the clamps elastic, tough, fatigue resistant, corrosion-resistant, long life and safe.

4. Not only protects the cable, its round and smooth shape can greatly reduce corona discharge and electromagnetic loss

Pictures and Illustrations

1. Structural Reinforcing Rods 2. Dead-end Component 3. AGS Clamp 4. EyeChainLink(TypeZH)  5. U-Clevis  6. Grounding Clamps

Model Specification

The grip strength of single suspension clamp shall not be less than 18% of the RTS.